Refyne Filters

Refyne FibreOnyx Economic Carbon Filter 5µmm

RFO-5M-10 and RFO-5M-20

New Product

Refyne's newest carbon filter is made from activated coconut carbon bonded antimicrobial fibres which removes chlorine and sediment

With Chlorine reduction 52,500 litres @ 2mg/l* this makes it one of the top value carbon cartridges in the market.

Equipped with an antimicrobialagent which prevents premature blocking in order to maximise full chlorine capacity utilization.

This Carbon Filter is an excellent alternative to Pentair CFB-Plus10 based on price and performance.

Filter needs to be flushed for 15 minutes prior to first use.

*In some cases service life will not be reached if there is a high content of Chlorine or Sediment in the supply water.

Refyne Economic Carbon Block Filter 5µm 20"

REC-5M-20

A high grade, economically priced carbon block filter.

High levels of chlorine can damage R/O membranes. This filter provides chlorine removal efficiency of up to 60%, proving to be more effective than the commonly used Spectrum CB range or widely sold inexpensive carbon block filters.

Manufactured using acid-washed bituminous carbon, a highly microporous structure which targets larger organic molecules such as benzene.

Available in 5 mircon.

Refyne Standard Powder Activated Carbon Block Filter 5µm 20"

RSC-5M-20

Standard Carbon Filter providing higher capacity than the Economic Carbon Filter.

Formulated from Powder Activated Coconut Carbon

Effective removal of chlorine which, at high levels, can damage R/O membranes.

Provides food grade high-capacity taste and odour reduction.

WRAS approved cartridge.

Refyne SRO-1812-150

150 GPD Reverse Osmosis Membrane

Refyne's residential membrane is manufactured using a fully automated production which ensures consistency whilst maximising the usable surface area of this multi-leaf membrane.

With flow rates up to 30% higher than traditionally hand-rolled elements, which are often prone to high failure rates, you can be confident that the Refyne 150 GPD membrane is the best choice for residential elements housed in the majority of 1812 sized housings.

You can easily upgrade your lower flow membrane (which will likely be producing 50/75 GPD) to our 150 GPD membrane by simply changing the flow restrictor.

With continuous flow and 60 PSI pressure achieved, this membrane can produce up to 570 litres (27.9LPH) in a day with a rejection rate of 98%. The membrane can be run at a lower pressure, however there will be a reduction in both flow and rejection rates.

Compatible with Axeon TF-1812-150, Spectrum SRO TF-1812-150, Vontron ULP-1812-150.

Refyne LP 4040HF

Commercial Low Pressure Reverse Osmosis Membrane

Refyne's LP-4040HF R/O low pressure commercial membrane element provides reliability, high performance and consistent results at a competitive price. LP4HF Series RO Membranes are low energy elements with a standard operating pressure of 100 PSI.

This membrane offers an excellent alternative to the commonly used Axeon HF5-4040. With its higher flow rate, it works very effectively with low water pressure.

Please be aware that at low pressure of 30 PSI the rejection rate will be reduced to 95%. To achieve full rejection rate 100 PSI is required.

However, using our modified membrane housings it is possible to achieve a rejection rate of 97% at 30 PSI. Used in conjunction with our booster pump, average rejection rate will be between 98 and 99%, depending on hardness of water.

Refyne LP 4040

Commercial Low Pressure Reverse Osmosis Membrane

This low pressure commercial membrane element provides reliability, high performance and consistent results at a competitive price. LP4 Series RO Membranes are low energy elements with a standard operating pressure of 100 PSI.

Unlike other advertised membranes in this price range this operates at 100 PSI compared to other ranges at 150 PSI.